| available options |
Infill device in front version
(font OCR B1) or in rear (font OCR A1 or MasterCard). Chip
contact initializing. FLIP-OVER module (front/rear print). Floor
stand unit for Pro-Series. |
| bar codes |
Code 39, EAN8, EAN13, 2/5 int,
Code 128, Codabar and others. |
| built-in tipper unit |
Off-line tipping possibility
(11 lines). Ribbon saving feature. |
| communication interface |
Serial RS232 port and parallel
port. |
| dimensions and weight |
1200 x 480 x 350 mm x 80 kg.
(47,25"x19"x13,75"x178 lbs) |
| drum capacity |
Drum capacity: 105 characters,
embossing and/or infill. |
| electrical requirements |
117 V / 60 Hz -220 V / 50 Hz. |
| fonts/printing |
Internal or Windows True type
fonts. |
| graphics |
Lines, frames, logos, photo
images. |
| input hopper capacity |
200 cards. |
| magnetic stripe encoding |
3 Tracks ISO 7811, LoCo-MeCo/HiCo. |
| output hopper capacity |
200 personalised cards. Reject
hopper. |
| performance |
Approx. 500 CPH standard credit
card format in embossing. |
| printing area |
Full card size. |
| printing orientation |
0°, 90°, 180°, 270°. |
| resolution |
300 DPI. |
| software |
Windows based application
software. Firmware: self diagnostic, selectable automatic repeat
card, pre-encoded card reading with full post processing of the
same card, resettable and non resettable counters. System status
and diagnostic messages reported on PC. Optional LinkWare
application for in-line operation with other Pro-Series modules. |
 |
|
|
 |
|
 |
|
 |
|
| The Combi 1000 combines high
resolution thermographic printing with embossing, indent,
tipping, magnetic stripe and chip encoding in just one pass |
| • Equipped with the MSP
system, allowing 4 cards to be processed simultaneously. |
| • Easy maintainence: Operator
changeable print head |
| • Optional chip encoding
station |
| • Available with special
characters for the personalization of international credit cards
such as VISA and MasterCard. |
|
