| AVAILABLE OPTIONS: |
chip contact initializing on
each hopper. LinkWare application for in-line operation with
other Pro-Series equipment. SDK Software Developer Kit. Floor
stand unit for Pro-Series. |
| CARD HANDLING - Card
dimensions: |
card size ISO standard CR-80 |
| CARD HANDLING - Card
thickness: |
0.030” or 0.032” |
| CARD HANDLING - Input
hopper capacity: |
n. 6 input hoppers, 200 cards
each (0.030”) |
| CARD HANDLING - Negative
hopper: |
40 cards |
| CARD HANDLING - Output
hopper capacity: |
200 cards |
| COMMUNICATION INTERFACE: |
Serial RS232 port and parallel
port |
| DIMENSIONS AND WEIGHTS -
Dimensions of floor base: |
WxDxH=28”x17”x35” |
| DIMENSIONS AND WEIGHTS -
Dimensions with floor base: |
WxDxH= 28”x20”x48” |
| DIMENSIONS AND WEIGHTS -
Physical dimensions: |
WxDxH= 34”x19”x14” |
| DIMENSIONS AND WEIGHTS -
Weight with floor base: |
219 lb |
| DIMENSIONS AND WEIGHTS -
Weight: |
120 lb |
| ELECTRICAL REQUIREMENTS: |
117V / 60Hz – 230V / 50Hz |
| MEMORY AND DATA -
Miscellanea: |
Lithium back-up battery.
Security operation with key lock |
| MEMORY AND DATA -
Software/Firmware: |
Windows based application
software. Self diagnostic; automatic reception of faulty card;
clearable and not-clearable counters. System status and
diagnostic messages reported on PC. |
| OPERATING TEMPERATURE |
50°F till 95°F |
| POWER CONSUMPTION: |
as multifeeder 150 Watt;
including chip option 250 Watt. |
| RELATIVE HUMIDITY: |
20% - 85% non condensing |
